Description
CryoSTUCK® – Thermal-Transfer Cryogenic Labels for Frozen Vials & Surfaces
These cryogenic labels provide an all-in-one solution for cryo storage as they firmly adhere to both ambient and already frozen* surfaces (as low as -80°C/-112°F) without the need for thawing, cure time, or any other special treatment. They maintain excellent long-term adhesion when stored under cryogenic conditions. Due to their special adhesive and conformable design, these cryo labels can be applied onto both flat and curved surfaces, ideal for identifying cryo vials, microtubes, as well as cardboard and polycarbonate storage boxes destined for long-term storage in liquid nitrogen tanks (-196°C/-321°F), ultra-low temperature freezers (-80°C) and dry ice transportation. Perfectly suited for identifying vials destined for immediate immersion in liquid nitrogen as well as labeling already frozen vials without having to thaw them first, thus preserving the biological integrity of the frozen specimens.
These permanent cryo labels will also resist elevated temperatures up to +121°C/+249°F and are perfectly suitable for identifying containers destined for heated water bath thawing directly after removal from ultra-low temperature storage. Furthermore, these durable labels will resist standard steam autoclave sterilization conditions (+121°C/+249°F, 16psi, 20 minutes).
Compatible with most common thermal-transfer printers, these labels’ printout displays an optimal resistance to routinely used laboratory chemicals like alcohols, acetone, xylene, disinfecting solutions, and surface-sanitizing wipes when printed by our recommended XAR-class ink ribbon. They can also be written on with our cryo markers.
*On frozen surfaces, to ensure the best adhesion, it is recommended that heavy residual frost be removed with a lint-free cloth prior to affixing CryoSTUCK labels.
Benefits:
- Ultra-resistant adhesive ensures no flagging or detachment when stored in liquid nitrogen
- Thermal-transfer printable for the best printout and barcode quality
- Ideal for labeling ambient temperature as well as frozen surfaces without thawing first
- No overlap or wrap-around required for proper adhesion
- Wide temperature range resistance
Specifications
Size: 4″ x 4"
(101.6 mm x 101.6 mm)
Labels/Roll: 300 (1″ core), 500 (3″ core)
Perforated: Yes
Temperature Range: -196°C to +121°C
(-320.8°F to 249.8°F)
Min. Application Temperature: -80°C
(-112°F)
Adhesive: Permanent
Printing Methods: Thermal-Transfer
Features: Frozen Vials
Resistances: Cryogenic (-196°C), Deep-Freeze (-80°C)
Recommended Ink Ribbons: XAR-Class
Class: UC
Brand: CryoSTUCK®
Color(s): White
Reviews
Frequently Asked Questions
Yes, thermal-transfer CryoSTUCK labels require a thermal-transfer ink ribbon to be printed. These labels require an XAR-class ribbon of the same width or larger, compatible with the thermal-transfer printer being used.
No, an overlap is not required for the proper adhesion of these cryogenic labels on ambient or frozen curved and flat surfaces.
Yes, CryoSTUCK labels have been specially designed to identify already frozen surfaces. They can be affixed at a minimum temperature of -80°C/-112°F, eliminating the need to thaw valuable samples.
To ensure proper application of these labels, wipe the surface with a clean lint-free disposable wipe (e.g: KimWipe™) prior to affixing the label to remove excess frost. Apply the edge of the label first and press firmly to anchor it, while avoiding excessive contact with the adhesive. Then, press the label securely into position along the vials’ entire circumference.
Yes, CryoSTUCK labels can be used to label samples prior to storing them in low temperature freezers and liquid nitrogen tanks for prolonged periods.
No, the vials can be stored in liquid nitrogen (-196°C/-321°F) or ultra-low temperature freezers (-80°C/-112°F) immediately following label application, requiring no cure time.
No, these CryoSTUCK labels are not designed to be applied over an existing label. To cover-up existing labels, our blackout CryoSTUCK labels will conceal pre-existing information, while our clear CryoSTUCK labels can be applied over an existing label, acting as a laminate to reinforce it.
Yes, these thermal-transfer CryoSTUCK labels are resistant to standard autoclave cycles (+121°C/+249°F, 16psi, 20 minutes).
Yes, When printing with our recommended XAR-class ribbon, the printout of these labels exhibits excellent resistance to direct exposure to commonly used laboratory chemicals and solvents, such as alcohols, acetone, xylene, and disinfecting solutions.
No, these CryoSTUCK labels have a permanent adhesive that is not made for easy removal.
Please consult our handy sizing guide, where you will find recommendations for the most common vial/tube sizes.
No, these labels are currently available only in white. For additional color options, contact our technical support team.
Yes, barcoding or label design software, such as BarTender and ZebraDesigner, can be used to create templates that conform to your label’s size. You can then insert design elements within the template for easy printing.
Yes, thermal-transfer CryoSTUCK labels can be preprinted with graphics and logos, as well as variable or serialized information from a database. Learn more about our custom printing options.
Resources
Recommended Products
Related Products
-
Thermal-Transfer Cryogenic Labels for Frozen Vials & Surfaces – 1.25″ x 0.875″ #UC-9
€52.70 eur View Product -
Thermal-Transfer Cryogenic Labels for Frozen Vials & Surfaces – 0.94″ x 0.5″ + 0.437″ #UC-52NOT
€115.10 eur View Product -
Thermal-Transfer Cryogenic Labels for Frozen Vials & Surfaces – 1″ x 1″ #UC-29
€51.30 eur View Product -
Thermal-Transfer Cryogenic Labels for Frozen Vials & Surfaces – 1″ x 0.5″ #UC-7
€38.70 eur View Product
